L type wrench

No matter where whether its expensive golf equipment or your old record collection, you cant afford to have it ruined. Not only is it expensive to replace ruined walls, floors, and ceilings, but whatever is stored down below can be irreparably damaged. The water should help push away the pieces broken by the snake. Follow these tips to fix a clogged drain before your basement floods. Hot water acts as a lubricant for your pipes, and its always a good idea to run it through your system after unclogging a drain. And its for good reason, therefore, that all measures should be taken to avoid this horrendous scenario.For specifically this reason, basement drains usually have a clean out access port.The first thing to do is take a deep breath; this is a fixable situation, even without a plumber. Pull out a few feet of plumbers snake.

As you continue to push the snake in youll find resistance. Pour some hot water down the drain and gently push the snake in, until you encounter resistance. Thats why you have gloves! Just deposit it in the bucket and throw it out afterwards. If you run your snake through your pipes and encounter no resistance, this is likely the case.Try to avoid using chemical clog removers as the chemicals can be harmful if used incorrectly or too frequently.But be careful! If you push the snake a couple times and still meet resistance, the blockage might be more substantial than something like hair or cloth. Typically theres more than one blockage, so keep pushing on until you break through. In this case, shoot some hot water down the pipes to fully clear them of any remaining debris.

Typically the floor drain is the last one before the end of the house, so water from all the other pipes filter through before exiting the premises. In any case, following these steps will help you unclog your basement drain, ultimately giving you peace of mind. At this point, calling a plumber is unavoidable. Not only does this make it act like a corkscrew, penetrating pieces it encounters, but it also adds China Ratchet Wrenches Factory to the longevity of the snake itself. You dont want to push a solid object further up into the pipe. Theres a strong possibility that at this stage therel be waste coming up with the return of the crank. If the clog still remains, repeat the steps here until youre successful.

Also, make sure nobody in the home runs any water.One of the most fearsome nightmares a homeowner faces is the prospect of a flooded basement. Gradually recall the snake out of the pipes by winding the crank. Also, be sure to only turn the snake clockwise. With gloves on, find a bucket and remove all the standing water in order to access the floor drain.Hopefully you have sufficiently cleared the blocked pipes. Using a crescent wrench, release the clean out plug.One thing to be mindful of is the possibility that the clog isnt on your property.